Dongguan Lis Cosmetic Sales Department
Main products:Hair Curler,Plastic Hair Roller,Spiral Hair Curler,Hair Pin,Round Plastic Hair Curlers
Products
Contact Us
  • Contact Person : Ms. SONG ALAN
  • Company Name : Dongguan Lis Cosmetic Sales Department
  • Tel : 86-769-23297512
  • Fax : 86-769-22993065
  • Address : ,,WanJiang District .
  • Country/Region : China
  • Zip : 523000

Professional nail drill for nail polish

Professional nail drill for nail polish
Product Detailed
Professional nail drill , it has foward and reverse dual direction-rotations for the left or right-handed nail technicians .

Professional nail drill is an idea filing tool set for nail decoration .It has forward and reverse dual direction-rotations for the left or right-handed nail technicians , from 0 to 30000 rpm adjustable speed ,quiet & smooth operation handpiece with a flexible extension , which is convenient to use for finishing the nail .

1.Technical specifications:

   a. Main(power supply & control ) part

   1. Rated voltage range: 220V-240V 110V-120V ,50/60Hz

   2.Power : 10W.

   3.Output rated voltage: DC3-12V

b.Handpiece(motor) part

  1 .Working voltage :DC3-12V

   2.Rated current : 0.8A

   3.Rated Speed : 0rpm min -20000 rpm max .

One set including : Power box , Quick-change Handpiece , Handpiece Cradle , Bits and Shaft .

2. Installation and wire connection

   1. Connect the 5-pin plug of the portable grinding head/hand piece  to the OUTPUT socket at the main panel .

   2. Connect  the pedal switch to the FOOT S/W socket .

  3.  Select grinding mould of different sizes according to actual requirements and fasten it into the front of the    portable grinding head .

   4. Switch the speed control to the left .

   5. Connect with the main source power .

3.  Operation :

   1. Press the function switch on the right to HNAD for manual control , the indicator will be on and the grinding head starts to moving slowly. The diode LED 1-2 will be on .

   2. Turn the SPEED CONTROL to the right to accelerate the grinding head ,and all the LED indicators for the speed will be on .

  3. When the function switch is pressed to FOOT ,step on the pedal the speed will be accelerated , and loose the foot ,the speed will decrease(foot switch is optional).

  4. The turning direction can be swapped : FWD means clockwise direction and the REV means counterclockwise direction .

   5.Adjust the speed of the grinding head within a reasonble range .

  6.Please adjust the handpiece to the lowest speed before changing forward/backward direction .

4. Instructions :

   1.  Don't change the turning direction too frequently . Otherwise ,it will damage the grinding head .

    2. Turn the SPEED CONTROL  counterclockwise to decelerate the grinding head to the minimum before turning off and switch the main power source to 0.

    3.After operation ,put the grinding head on the top of the main panel .

    4. While the grinding head is in operation ,never pull out the 5-pin plug of the portable grinding head .

    5. For long idle time ,please disconnect the source power.

    6. Any unauthorized disassembling of the product is prohibited . In case of any breakdown , please contact the agent or anthorized repair center . We promise swift , high-quality and satisfactory service .

   7. If the supply cord is damaged , it must be replaced by manufacturer , its service agent or similarly question in order avoid a hazard .

Professional nail drill for nail polish



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.