Professional nail drill for nail polish

Professional nail drill , it has foward and reverse dual direction-rotations for the left or right-handed nail technicians .

Professional nail drill is an idea filing tool set for nail decoration .It has forward and reverse dual direction-rotations for the left or right-handed nail technicians , from 0 to 14000 rpm adjustable speed ,quiet & smooth operation handpiece with a flexible extension , which is convenient to use for finishing the nail .

Technical specifications:

Voltage : 220V-240V 110V-120V .

Power : 10W.

Collect: 2.5mm(3/32")

Rated Speed : 14000 rpm max .

One set including : Power box , Quick-change Handpiece , bits and Shaft .

A: Installation and wire connection  

1. Connect the 3.5 plug of the portable grinding head/hand piece to the OUTPUT socket at the main panel .

2. Connect the output plug of the DC12V voltage-stabilizer to the 6.5 plug on the rear board of the main panel .

3. Select grinding mould of different sizes according to actual requirements,and fasten it into the front of the portable grinding head .

4. Turn the SPEED CONTROL counter clockwise to the end .

5. Switch the power source to OFF .

6. Connect the switching mode voltage stabilizer with the main source power .

B. Operation

1. Switch the source power to ON , and the indicator POWER should be on ,and the Glazing machine is ready for operation .

2. Turn the SPEED CONTROL clockwise slowly and the portable grinding head starts to turn and accelerate to the top speed .

3. Turn the SPEED CONTROL counterlockwise to the decelerate the grinding head .

4.The turning directions can be Swapped : FWD means clockwise direction and REV means counterclockwise direction .

5. Adjust the speed of the grinding head within a reasonable range .

C. Instruction :

1. Don't change the turning direction too frequently ,otherwise it will change the grinding head .

2. Turn the SPPED CONTROL counterclockwise to decelerate the grinding head to the minimum before turning offand switch the main power source to OFF .

3. After operation, put the grinding head on the top of the main panel .

4. While the grinding head is in operation ,never pull out the 3.5 plug of the portable grinding head .

5.For long idle time please disconnect the source power .

6. Any unauthorized disassembling of the product is prohibited , In case of any breakdown , please contact the agent or authorized repair center .We promise swift ,high quality and satisfactory service .

Professional nail drill for nail polish